Suzuki Wagon R Manual page 985

9-44 BODY SERVICE
INSTALLATION
Reverse removal procedure for installation, noting the following
items.
D Attach adhesive tapes (1) to head lining (2) as shown figure.
D Install interior trims in order of (a), (b), (c).
D When install roof handle (1), match marks (2) on roof handle (1)
and roof garnish (3).
D Tighten roof handle screw (4) to specified torque.
Tightening Torque: 2 N
D Tighten sun visor screws (1) to specified torque.
Tightening Torque: 4 N
D Install sliding roof trim (1) as shown in figure.
.
m (0.2 kg-m, 1.4 lb-ft)
.
m (0.4 kg-m, 2.8 lb-ft)