Suzuki Wagon R Manual page 1214

OIL PAN AND OIL PUMP STRAINER
: Tightening Torque
: Do not reuse
REMOVAL
1) Raise vehicle.
2) Drain engine oil by removing drain plug (1).
3) Remove right side of engine under cover.
4) Disconnect oxygen sensor No.2 connector and then remove ex-
haust No.1 pipe with oxygen sensor No.2.
5) Remove clutch housing lower plate.
6) Remove CKP sensor (1).
7) Remove oil pan and then oil pump strainer (1).
ENGINE MECHANICAL 6A-23
1. Oil pan:
Apply sealant 99000-31150
to oil pan mating surface
2. Oil pump strainer
3. Seal
4. Drain plug gasket
5. Drain plug
6. CKP sensor
7. Oil pan bolt
8. Oil pan nut
9. CKP sensor bolt
10. Oil pump strainer bolt
11. Oil pump strainer bracket bolt