Suzuki Wagon R Manual page 854

6) Hook return spring.
7) Apply grease to release bearing (1) inside and release shaft arm
(2), then set bearing.
"A": Grease A, 99000-25010
8) Apply small amount of grease to input shaft (3) spline and front
end as well.
"B": Grease I, 99000-25210
9) Set release lever to release shaft aligning their punch marks (1),
then tighten bolt.
Tightening Torque
(a): 13 N·m (1.3 kg-m, 9.5 lb-ft)
CLUTCH 7C-13