Suzuki Wagon R Manual page 964

1. Hood cushion
(a)
(a)
HOOD
REMOVAL
1) Remove window washer hose (1) from hood (2).
2) Remove four mounting bolts (3) to detach hood (2).
INSTALLATION
Reverse removal procedure to install hood.
ADJUSTMENT
Hood position adjustment.
Fore-and-aft and right-and-left adjustment.
Adjust hood clearance by loosening hood mounting bolts, refer to
"PANEL CLEARANCE" in this section.
3) Vertical adjustment
If only one side (right or left) of hood is not level with front fender,
make it level by tightening or loosening hood cushion.
4) Hood lock position adjustment
When installing hood lock (1), bring bolt at highest position and
move it in vertical direction for adjustment free from loose to
hood striker.
Tightening Torque
.
(a): 10 N m (1.0 kg-m, 7.0 lb-ft)
INSPECTION
Check that hood opens and closes smoothly and properly. Lubri-
cate if necessary. Also check that secondary latch operates proper-
ly (check that secondary latch keeps hood from opening all the way)
and hood locks securely when closed.
Adjust hood locks position if necessary.
BODY SERVICE 9-23