Suzuki Wagon R Manual page 851

7C-10 CLUTCH
2) Using special tool, install input shaft bearing to flywheel.
Special Tool
(B): 09925-98210
3) Aligning clutch disc to flywheel center by using special tool,
install clutch cover (1) and bolts. Then tighten bolts to specifica-
tion.
NOTE:
D While tightening clutch cover bolts, compress clutch disc
with special tool (C) by hand so that disc centered.
D Tighten cover bolts little by little evenly in diagonal order.
Special Tool
(A): 09924-17810
(C): 09923-36330
Tightening Torque
.
(b): 23 N m (2.3 kg-m, 16.5 lb-ft)
4) Slightly apply grease to input shaft (1), then join transmission as-
sembly with engine. Refer to SECTION 7A for remounting pro-
cedure.
"A": Grease I, 99000-25210
NOTE:
When inserting transmission input shaft to clutch disc, turn
crankshaft little by little to match splines.