Suzuki Wagon R Manual page 973

9-32 BODY SERVICE
REAR DOOR LOCK ASSEMBLY
REMOVAL
1) Remove door trim and door sealing cover, refer to steps 1) to 4)
of REAR DOOR GLASS REMOVAL in this section.
2) Disconnect door opening control rod (1) and door lock control
rod (2).
3) Loosen door lock mounting screw (3), door lock actuator screw
(5) (if equipped power door lock) and remove door lock assem-
bly (4).
INSTALLATION
Reverse removal sequence to install rear door lock, noting points
mentioned in "FRONT DOOR LOCK ASSEMBLY".
1. Outside handle
2. Inside handle bezel
3. Door lock assembly
4. Latch striker
5. Door lock screw
6. Door latch striker screw