Suzuki Wagon R Manual page 974

BACK DOOR LOCK ASSEMBLY
REMOVAL
1) Remove door trim.
2) Disconnect door lock control rod (1).
Disconnect control rod (2).
3) Disconnect door lock motor lead wire if equipped.
4) Loosen door lock mounting screw (3) and remove door lock as-
sembly (4).
INSTALLATION
Reverse removal procedure to install back door lock assembly not-
ing the following points.
D Door latch striker.
Adjust door latch striker so that its center aligns with the center of
groove in door latch base.
To adjust securely door lock operates, insert proper number of
shims below the bottom of striker, as shown.
1. Shim
BODY SERVICE 9-33
1. Door lock assembly
2. Door opener
3. Latch striker
4. Door lock screw
5. Latch striker screw