8D-8 WINDOWS, MIRRORS, SECURITY AND LOCKS
FRONT AND REAR WASHER PUMP
REMOVAL
3
1) Disconnect negative cable at battery.
2) Remove front fender lining (LH).
3) Remove inlet pipe (3) from washer tank (1).
4) Remove washer tank (1) fitting nuts.
5) Disconnect pump (2) lead wires and hoses.
6) Remove washer tank (1).
7) Remove pump (2) from tank (1).
INSPECTION
1) Connect battery (+) terminal to pump (a) terminal, and battery
(–) terminal to pump (b) terminal.
Check that water jets from front washer side (1).
2) Connect battery (+) terminal to pump (b) terminal, and battery
(–) terminal to pump (a) terminal.
Check that water jets from rear washer side (2).
INSTALLATION
Reverse removal procedure for installation.