Key Coding - Suzuki Wagon R Manual

9-34 BODY SERVICE
INSPECTION
Check that door open and closes smoothly and properly.
Also check that door latch half lock operates properly (Check that
door latch half lock keeps door from opening all the way) and door
latch full locks securely closed.
Adjust door latch striker position if necessary.

KEY CODING

KEY USAGE AND IDENTIFICATION
Key is used for ignition and door lock cylinder. Keys are cut on both
edges to make them reversible.
Key identification is obtained from five character key code stamped
on key code tag. Using this key code, key code cutting combination
can be determined from a code list (available to owners of key cut-
ting equipment from suppliers).
If original key is available, key code cutting combination can be de-
termined by laying key.
IGNITION SWITCH LOCK CYLINDER
Removal/Installation
See Section 3C, "STEERING WHEEL AND COLUMN".
ELECTRICAL DIAGNOSIS
For ignition switch electrical troubleshooting, see Section 8C,
"INSTRUMENTATION/DRIVER INFORMATION" in "BODY ELEC-
TRICAL SYSTEM".