Suzuki Wagon R Manual page 797

7B-86 AUTOMATIC TRANSMISSION (4 A / T)
REAR CLUTCH (C1 CLUTCH)
DISASSEMBLY
1) Remove snap ring.
2) Remove flange (1), discs and plates.
3) Remove shaft snap ring (1).
Compress piston return springs and remove shaft snap ring.
Place special tool (clutch spring compressor) on spring seat and
compress spring with a press (2), and then remove shaft snap
ring, using a flat end rod or the like (3).
CAUTION:
Do not push down return spring more than necessary.
Special Tool
(A): 09926-96020
1. Input shaft oil seal ring
2. Input shaft subassembly
3. D-ring
4. Rear clutch piston
5. Rear clutch return spring seat
6. Rear clutch balancer
7. Shaft snap ring
8. Clutch plate
9. Clutch disc
10. Clutch flange
11. Snap ring