Suzuki Wagon R Manual page 1046

WARNING:
D For handling and storage of a live seat belt pretensioner,
select a place where the ambient temperature below 65_C
(150_F), without high humidity and away from electric
noise.
D Never carry the seat belt pretensioner by the wires or con-
nector on the underside of the pretensioner.
Otherwise, personal injury may result.
DEPLOYED AIR BAG (INFLATOR) MODULES AND
ACTIVATED SEAT BELT PRETENSIONERS
WARNING:
D The air bag (inflator) module and seat belt pretensioner
immediately after deployment/activation is very hot. Wait
for at least 10 minutes to cool it off before proceeding the
work.
D Do not apply water, oil, etc. to deployed air bag (inflator)
module and to activate seat belt pretensioner.
D After an air bag (inflator) module has been deployed, the
surface of the air bag may contain a powdery residue. This
powder consists primarily of cornstarch (used to lubri-
cate the bag as it inflates) and byproducts of the chemical
reaction. As with many service procedures, gloves and
safety glasses should be worn.
D Wash your hands with mild soap and water after complet-
ing the work.
Refer to the procedure described under "Deployed Air Bag (Inflator)
Module and Activated Seat Belt Pretensioner Disposal" in this sec-
tion.
AIR BAG SYSTEM 10B-49