(A)
Intermediate shaft
DISASSEMBLY
1) Remove reduction drive oil seal and snap ring, and then
drive out intermediate shaft.
2) Drive out intermediate shaft right bearing (1) from intermedi-
ate shaft by using bearing puller and hydraulic press.
3) Remove reduction drive gear oil seals (1) by using hydraulic
press and special tools.
Special tool
(A) : 09924-84510-005
(B) : 09913-75821
Transfer output retainer assembly
DISASSEMBLY
1) Uncaulk flange nut.
2) Remove flange nut while holding flange (1) by using special
tool.
Special tool
(A) : 09930-40113
1
3) Remove flange (1) by special tool.
Special tool
(A) : 09913-60910
TRANSFER 7D-9