Suzuki Wagon R Manual page 1377

22) Install wheels and tighten wheel nuts to specified torque.
Tightening torque
Wheel nuts (f) : 85 N·m (8.5 kg-m, 61.5 lb-ft)
23) Upon completion of all jobs, pull parking brake lever with
about 20 kg, (44 lbs) load three to five times so as to obtain
proper drum-to-shoe clearance.
Adjust parking brake cable referring to "PARKING BRAKE" in
Section 5C.
24) Lower hoist.
25) Tighten right and left trailing arm nuts (1) and shock
absorber lower bolts (2) to specified torque.
Tighten lateral rod nuts (3) to specified torque.
NOTE:
When tightening these bolts and nuts, be sure that vehi-
cle is off hoist and in non loaded condition.
Tightening torque
Rear trailing arm nuts (a) : 80 N·m (8.0 kg-m, 58.0 lb-ft)
Rear shock absorber lower bolts
(b) : 63 N·m (6.3 kg-m, 45.5 lb-ft)
Lateral rod axle housing side nut
(c) : 50 N·m (5.0 kg-m, 36.5 lb-ft)
Lateral rod body side nut (d) :
100 N·m (10.0 kg-m, 72.5 lb-ft)
26) Check to ensure that brake drum is free from dragging and
proper braking is obtained.
27) Perform brake test (foot brake and parking brake).
28) If equipped with LSPV, check and adjust LSPV spring refer-
ring to "LSPV INSPECTION AND ADJUSTMENT" in Section
5A and perform "FLUID PRESSURE TEST" in Section 5.
29) Check each installed part for oil leakage.
REAR SUSPENSION 3E-13