Suzuki Wagon R Manual page 1380

4B-2 PROPELLER SHAFTS
1
4
1. Propeller shaft No.1 with center support
2. Viscous coupling with center support
3. Propeller shaft No.2
4. Forward
5. Propeller shaft No.2 bolt
: Apply thread lock 99000-32110 to thread.
6. Washer (if equipped)
Tightening torque
Propeller Shaft Joint Check
If universal joints are suspected of producing chattering or rattling
noise, inspect them for wear. Check to see if cross spider rattles
in yokes and replace defective propeller shaft with new one.
Noise coming from universal joint can be easily distinguished
from other noises because rhythm of chattering or rattling is in
step with cruising speed. Noise is pronounced particularly on
standing start or in coasting condition (when braking effect of
engine is showing in the drive line).
On-Vehicle Service
23 N·m (2.3 kg-m)
23 N·m (2.3 kg-m)
PRECEDENTIAL INSPECTION
• Check propeller shaft connecting bolts for looseness. If
• Check propeller shaft joints for wear, rattle and damage. If
• Check propeller shaft center support for biting of foreign mat-
2
6
55 N·m (5.5 kg-m)
looseness is found, tighten to specified torque.
any defect is found, replace.
ter, crack, abnormal noise and damage. If any defect is
found, replace.
23 N·m (2.3 kg-m)
3
5
23 N·m (2.3 kg-m)