Suzuki Wagon R Manual page 1216

4) Install CKP sensor (1) and connect its coupler, then clamp its
(a)
5) Install exhaust No.1 pipe and connect oxygen sensor No.2 con-
6) Install right side of engine under covers.
7) Refill engine with engine oil, referring to item "ENGINE OIL
harness.
Tightening Torque
.
(a): 10 N m (1.0 kg-m, 7.5 lb-ft)
nector.
Tighten bolts to specified torque.
Tightening Torque
.
(a): 42 N m (4.2 kg-m, 30.5 lb-ft)
NOTE:
Use new gasket for exhaust No.1 pipe.
CHANGE" in Section 0B.
ENGINE MECHANICAL 6A-25