Suzuki Wagon R Manual page 972

3. Shaft
Front Door
Rear Door
INSTALLATION
To install front door lock, reverse removal procedure, noting the fol-
lowing.
D Door latch striker.
Move door latch striker (2) up or down so its center aligns with the
center of groove "A" on the door lock assembly (1), as shown.
NOTE:
Striker should be moved vertically and placed level. Do not
adjust door lock.
Tightening Torque
.
(a): 10 N m (1.0 kg-m, 7.2 lb-ft)
.
(b): 6 N m (0.6 kg-m, 4.3 lb-ft)
D Move door latch striker (1) sideways to adjust door outer panel
surface (2) flush with rear door outer panel or body outer panel
surface (3), as shown.
In order to correctly obtain door lock operates, increase or de-
crease number of shims inserted between body and striker (1) to
adjust it.
NOTE:
Apply grease to striker contacts parts periodically.
INSPECTION
Check that door open and closes smoothly and properly.
Also check that door latch half look operates properly (check that
door latch half lock keeps door from opening all the way) and door
latch full locks securely when closed.
Adjust door latch striker position if necessary.
BODY SERVICE 9-31