19) Disconnect A/C suction and discharge hoses and then
remove A/C compressor and its bracket (if equipped), refer
to Section 1B of the Service Manual mentioned in the FORE-
WORD of this manual.
20) Install support device.
21) Remove the following bolts and nuts referring to the figure of
"Engine Mounting" in this section.
a) Remove engine rear mounting bush bolt.
b) Remove engine left mounting nuts.
c) Remove engine right mounting bracket bolts and nut.
22) Before removing engine with transmission and transfer from
body, recheck to make sure all hoses, electric wires and
cables are disconnected from engine and transmission.
23) Lower engine with transmission and transfer from body.
ENGINE MECHANICAL 6A1-5