Suzuki Wagon R Manual page 1468

7D-24 TRANSFER
Transfer oil level/filler and drain plugs
Transfer bevel gear nut
Transfer case bolts
Transfer output retainer bolts
Transfer to transmission bolts
Transfer rear mounting bracket bolts
Transfer rear mounting bracket nuts
Transfer mounting bolt
Transfer rear mounting bracket No.2 bolts
Transfer stiffener bolts
Exhaust pipe bolts
Dynamic damper bolts (if equipped)
Transfer output flange nut (reference)
Transfer to engine stiffener No.1 bolts (if equipped)
Transfer to engine stiffener No.2 bolts (if equipped)
Material
Lithium grease
Sealant
Tightening Torque Specification
Fastening part
Required Service Material
Recommended SUZUKI products
(Part Number)
SUZUKI SUPER GREASE A
(99000-25010)
SUZUKI BOND NO. 1216B
(99000-31230)
• Install right side drive shaft, referring to Section 4A of the
service manual mentioned in the "Forword" of this manual.
• Install propeller shaft and tighten propeller shaft bolts and
center support bolts to specified torque (refer to Section 4B).
• Pour gear oil to transfer as specified, refer to "Oil Change" in
this section.
Check oil level and leakage.
N•m
21
150
23
50
50
55
50
55
55
50
50
50
100 – 300
50
23
• Oil seal lips
• Oil drain plug
• Oil level plug
• Mating surface of transfer case
Tightening torque
kg-m lb-ft
2.1 15.5
15.0 108.5
2.3 17.0
5.0 36.5
5.0 36.5
5.5 40.0
5.0 36.5
5.5 40.0
5.5 40.0
5.0 36.5
5.0 36.5
5.0 36.5
10.0 – 30.0 72.5 – 217.0
5.0 36.5
2.3 17.0
Use