Suzuki Wagon R Manual page 888

INSTRUMENTATION / DRIVER INFORMATION 8C-7
INSTALLATION
Reverse removal procedure for installation, noting the following.
D Be sure to enable air bag system after installation. Refer to ENAB-
LING AIR BAG SYSTEM in Section 10B for details.
SPEEDOMETER AND SENSOR
VEHICLE SPEED SENSOR (VSS)
Refer to VEHICLE SPEED SENSOR (VSS) in Section 7A.
FUEL METER/FUEL GAUGE UNIT
FUEL METER
INSPECTION
1) Disconnect Y/R lead wire going to gauge unit.
2) Turn ignition switch ON, and check that fuel meter indicates E.
3) Turn ignition switch OFF.
4) Ground Y/R lead through a 3.4 W test bulb (1) as illustrated.
5) Turn ignition switch ON and check that bulb light up and pointer
(2) moves to F side.
6) If fuel meter shows no operation, replace.