Suzuki Wagon R Manual page 507

6A1-52 ENGINE MECHANICAL
4) Reverse removal procedure for installation, nothing the follow-
ing points.
D Adjust drive belt tension, referring to "ENGINE COOLING"
section.
D Adjust A/C compressor belt tension, if equipped.
Refer to Section 1B.
D Adjust intake and exhaust valve lashes as previously outlined.
D Adjust accelerator cable play. Refer to Section 6E.
D Check to ensure that all removed parts are back in place.
Reinstall any necessary parts which have not been reinstalled.
D Refill cooling system referring Section 6B.
D Connect negative cable at battery.
D Confirm that ignition timing is within specification referring to
"IGNITION SYSTEM" section.
D Verify that there is no fuel leakage, water leakage and exhaust
gas leakage at each connection.