Suzuki Wagon R Manual page 949

9-8 BODY SERVICE
REMOVAL
1) Remove window regulator handle (1).
For its removal, pull off snap by using a cloth (2) as shown in fig-
ure.
2) Remove inside handle bezel (1).
3) Remove inside lock knob and door trim fitting screw.
4) Remove door trim (1).
With inside handle bezel (2) tilted as shown in figure, turn door
trim 90_ counterclockwise to remove it.
5) Remove door sealing cover (1).
6) Remove glass run (1).
Lower window all the way down. Then, use a tape-wrapped putty
knife (or screwdriver) to pry off glass run.
NOTE:
2
When removed glass run (1) from door panel (2), be careful
not to deformation for glass run (1).
1