Suzuki Wagon R Manual page 939

8G-24 IMMOBILIZER CONTROL SYSTEM
NUMBER OF FC
TRANS SKC
TRANSPONDER
F0: REGI FC / SKC
F1: REGI FC
SEL PASSWORD MOD
F0: INPUT
F1: REGISTER
HOW TO REGISTER IGNITION KEY
Register ignition key with built-in transponder by performing the fol-
lowing procedure.
NOTE:
Registering secret key to ignition key with built-in transponder
is able only once.
1) Perform IMMOBILIZER SYSTEM COMPONENTS REGISTRA-
2) Prepare ignition key with built-in transponder to be registered for
3) Prepare SUZUKI scan tool and immobilizer cartridge. Connect
4) Insert ignition key with built-in transponder to be registered to
5) Check scan tool DATA LIST for "NUMBER OF FC", "TRANS
1
REGISTERED
6) If FIX CODE is already registered in immobilizer control module
7) By using scan tool, register FIX CODE (FC) to immobilizer con-
8) After completing registration, turn ignition switch to ON position
9) If there is other keys to registered, perform steps 4) to 8).
HOW TO REGISTER PASSWORD
1) Perform IMMOBILIZER SYSTEM COMPONENTS REGISTRA-
2) Prepare SUZUKI scan tool and immobilizer cartridge. Connect
3) Register password by performing REGISTER in SEL PASS-
TION FLOW TABLE.
the vehicle.
NOTE:
As up to 5 ignition keys may be used for immobilizer control
system, make sure that total number of ignition keys that
are used for the vehicle is 5 or less.
SUZUKI scan tool to DLC with ignition switch at OFF position.
NOTE:
For operation procedure of SUZUKI scan tool, refer to its
operator's manual.
key cylinder and turn ignition switch to ON (II) position.
SKC" and "FIX CODE".
Turn ignition switch at OFF position and input password. If 5 igni-
tion keys are already registered, clear all FIX CODEs registered
in immobilizer control module by executing "CLEAR FC" com-
mand in IMMOBI CONT menu with scan tool.
and secret key in transponder is not registered, execute
"CLEAR FC" command with scan tool.
trol module and register secret key (SKC) to transponder by
executing REGI FC/SKC command in TRANSPONDER under
SELECT MODE menu with ignition switch at OFF position.
If secret key is already registered in ignition key with built-in
transponder, register FIX CODE by executing "REGI FC" at
TRANSPONDER menu under SELECT MODE with ignition
switch at OFF position.
and check that registration is executed correctly by monitoring
"FIX CODE REGISTERED" and "TRANS SKC REGISTERED"
displayed on scan tool DATA LIST.
TION FLOW TABLE.
Suzuki scan tool to DLC with ignition switch at OFF position.
NOTE:
For operation procedure of SUZUKI scan tool, refer to its
operator's manual.
WORD MOD menu.