Suzuki Wagon R Manual page 945

9-4 BODY SERVICE
INSTALLATION
NOTE:
If there is deformity for glass run, replace new one.
Reverse removal procedure to install door glass noting the follow-
ing points:
D Tighten glass attaching screws (1) to specified torque. Tighten
rear screw first, then front screw.
Tightening Torque: 6 N
D When door window front glass (1) is installed, fit weatherstrip (2)
convex part (3) to door panel cut part (4).
D When glass run (1) is installed, fit glass run convex part (2) to door
panel cut part (3).
D Secure door sealing cover with adhesive (1).
.
m (0.6 kg-m, 4.3 lb-ft)