Suzuki Wagon R Manual page 517

6A1-62 ENGINE MECHANICAL
6) Reverse removal procedure for installation, nothing the follow-
ing points.
D Adjust water pump drive belt tension, referring to "ENGINE
COOLING" section.
D Adjust A/C compressor belt tension, if equipped.
Refer to Section 1B.
D Adjust accelerator cable play. Refer to Section 6E.
D Check to ensure that all removed parts are back in place. Rein-
stall any necessary parts which have not been reinstalled.
D Refill engine with engine oil, referring to item "ENGINE OIL
CHANGE" in Section 0B.
D Refill cooling system referring to Section 6B.
D Connect negative cable at battery.
D Verify that ignition timing is within specification referring to
"IGNITION SYSTEM" section.
D Verify that there is no fuel leakage, coolant leakage, oil leak-
age and exhaust gas leakage at each connection.