Suzuki Wagon R Manual page 791

7B-80 AUTOMATIC TRANSMISSION (4 A / T)
ASSEMBLY
1) Install pump body oil seal (1).
Use special tool and hammer to install it, and then apply grease
to its lip portion.
Special Tool
(A): 09913-85210
"A": Grease 99000-25030
2) Install driven gear and drive gear to pump body (2) after applying
A/T fluid to gears.
3) Install stator shaft ass'y to pump body and tighten 11 pump cover
bolts to specification.
Tightening Torque
.
(a): 10 N m (1.0 kg-m, 7.5 lb-ft)
4) Install 2 new oil seal rings to stator shaft.
5) Apply grease to 2 oil seal rings.
6) Install D-ring applied with grease and make sure that it is not
twisted or extruded.
7) Check drive gear for smooth rotation.