Suzuki Wagon R Manual page 1208

TIMING BELT AND BELT TENSIONER
: Tightening Torque
REMOVAL
1) Disconnect negative cable at battery.
2) Remove right side of engine under cover (1).
3) Disconnect A/C suction and discharge hoses from A/C com-
pressor.
4) Remove A/C compressor and its bracket (if equipped), refer to
Section 1B.
5) Remove suction pipe and air cleaner assembly.
6) Support engine by using support device.
7) Remove engine right mounting bracket (1) and engine right
mounting swing bracket (2).
ENGINE MECHANICAL 6A-17
1. Timing belt
2. Tensioner
3. Tensioner plate
4. Tensioner spring
5. Spring damper
6. Camshaft timing pulley
7. Pin
8. Pulley bolt
9. Seal
10. Inside cover seal
11. Inside cover
12. Outside cover seal
13. Outside cover
14. Tensioner stud
15. Tensioner bolt
16. Tensioner spring screw