Suzuki Wagon R Manual page 847

7C-6 CLUTCH
INSTALLATION
1) Apply grease to cable end hook and also joint pin before instal-
ling cable.
"A": Grease A, 99000-25010
2) Hook cable end with pedal by using screwdriver or long nose pli-
ers from cabin inside, then join inner cable wire joint pin in re-
lease lever.
3) Fasten cable with 2 bolts (1) to dash panel (2).
Tightening Torque
(a): 11 N·m (1.1 kg-m, 8.0 lb-ft)
4) Screw in joint nut and adjust free travel of pedal to specification
by turning nut.
5) Check clutch for proper function with engine running.