Suzuki Wagon R Manual page 1383

INSTALLATION
Reverse removal procedure to install propeller shafts noting fol-
lowing point.
• When installing propeller shafts and viscous coupling with
center support, align the match marks (1).
Otherwise, vibration may occur during driving.
• Apply thread lock cement to thread of propeller shaft No.2
bolts.
"A" : Cement 99000-32110
• Use following specification to torque bolts.
Tightening torque
Propeller shaft bolts (a) : 23 N·m (2.3 kg-m, 17.0 Ib-ft)
Center support bolts (b) : 55 N·m (5.5 kg-m, 40.0 lb-ft)
Viscous coupling nuts (c) : 23 N·m (2.3 kg-m, 17.0 lb-ft)
2. Propeller shaft No.2
3. Viscous coupling with center support
4. Propeller shaft No.1 with center support
5. Washer (if equipped)
PROPELLER SHAFTS 4B-5