Suzuki Wagon R Manual page 1347

6H-6 CHARGING SYSTEM
UNIT REPAIR OVERHAUL
DISMOUNTING AND REMOUNTING
.
10 N m (1.0 kg–m)
.
6 N m (0.6 kg–m)
2
DISMOUNTING
1) Disconnect negative (–) cable at battery.
2) Hoist vehicle and remove right side splash cover.
3) Loosen generator belt adjusting bolt and generator pivot bolt.
When servicing vehicle equipped with A/C, remove compressor
drive belt before removing generator belt.
Refer to "COMPRESSOR DRIVE BELT" in Section 1B.
4) Slacken belt by displacing generator and then remove it.
5) Disconnect (B) and (L) terminal wire from generator.
6) Remove generator cover from generator bracket.
7) Remove generator.
REMOUNTING
Reverse dismounting procedure and for water pump belt tension
refer to SECTION 6B.
.
23 N m (2.3 kg–m)
.
23 N m (2.3 kg–m)
.
50 N m (5.0 kg–m)
1. "B" terminal wire
2. "L" terminal wire
3. Generator bolt
4. Generator belt
5. Generator cover
6. Generator
7. Splash cover (Right)
: Tightening torque