Suzuki Wagon R Manual page 875

8B-14 LIGHTING SYSTEM
TURN SIGNAL AND HAZARD WARNING
LIGHTS
TURN SIGNAL SWITCH (IN TURN AND DIMMER
SWITCH)
REMOVAL
1) Disconnect negative cable at battery.
2) Remove steering column cover. Refer to step 5) of CONTACT
COIL CABLE ASSEMBLY REMOVAL in Section 3C.
3) Pull out turn & dimmer switch.
4) Disconnect turn & dimmer switch lead wire couplers.
INSPECTION
Check the continuity at each switch position. If any continuity is not
obtained, replace switch.
Terminal
Switch Position
L
N
R
INSTALLATION
1) Connect couplers to turn & dimmer switch.
2) Push turn & dimmer switch into steering column till it clicks.
3) Install steering column cover. Reverse removal procedure.
TL TL TB TB TR TR