7F-8 REAR DIFFERENTIAL
DISASSEMBLY
1) Remove dynamic damper (1).
2) Put match marks (4) on differential side bearing caps (3) and
differential carrier (1).
3) Take off differential side bearing caps by removing their bolts
and remove differential gear assembly (2).
NOTE:
Check number of shims and thickness of each shim in
advance.
4) With aluminum plates placed on vise first, grip differential
case with it and remove drive bevel gear by removing its
bolts.
5) Using special tools, pull out differential side bearings.
Special tool
(A) : 09913-60910
(B) : 09925-88210
6) Remove differential pinion shaft.
7) Remove differential gears, pinions and washers.