Suzuki Wagon R Manual page 811

7B-100 AUTOMATIC TRANSMISSION (4 A / T)
1. Upper valve body
3. Lock-up control valve
4. Lock-up signal valve
Reference
Primary regulator valve spring (compression spring)
Primary regulator
valve spring
Lock-up control
valve spring
Lock-up signal
valve spring
Assembly
1) Apply A/T fluid to each valve, plate washer, spring, plunger,
2) Apply A/T fluid to each valve, sleeve spring, plug and key and
5. Fail valve No.2
6. Key (short)
7. Key (long)
3) Install oil strainers (1) and put steel balls (2).
Spring Free length "a" (mm)
sleeve and key.
Insert primary regulator valve (2) about half way then place plate
washer and spring. Push in primary regulator valve ass'y all the
way in. Insert plunger with sleeve and hold them with the key.
NOTE:
D Note the location of the key shown in picture.
D Compression spring has a identification color paint of
yellow.
D Note the direction of the primary regulator valve.
insert them, then fix them with the key.
NOTE:
Note the direction of the fail valve.
NOTE:
Clean oil strainer before installing.
Outside diameter "b"
(mm)
79.2 18.0
31.1 8.5
36.1 8.5