Suzuki Wagon R Manual page 1382

4B-4 PROPELLER SHAFTS
5) Loosen center support bolts (1), then remove propeller shaft
No.1 with center support (2), propeller shaft No.2 (3) and vis-
cous coupling with center support (4) all together.
6) Disconnect propeller shaft No.1 with center support and pro-
peller shaft No.2 from viscous coupling with center support.
INSPECTION
• Inspect propeller shaft and flange yoke for damage.
• Inspect propeller shaft for runout.
If damage is found or shaft runout exceeds its limit, replace.
Propeller shaft runout
Limit : 0.7 mm (0.028 in.)