Front Door Window Regulator - Suzuki Wagon R Manual

45_
D Install door window regulator handle (1) so that it has a 45° angle
when glass is fully closed, as shown in figure.

FRONT DOOR WINDOW REGULATOR

REMOVAL
1) Remove door glass, referring to steps 1) to 9) of FRONT DOOR
GLASS REMOVAL in this section.
2) Disconnect power window motor lead wire at coupler and loosen
clamp, if equipped.
3) Loosen regulator mounting nuts (1) and take out regulator
through hole (2) as shown in figure.
INSPECTION
1) Check regulator sliding and rotating parts for greasing.
2) Check rollers for wear and damage.
3) Check wire for damage.
Window regulator
lubrication point
INSTALLATION
Reverse removal procedure to install window regulator noting the
following.
D Tighten window regulator attaching nuts to proper tightening or-
der.
Tightening Order: (a) ! (b) ! (c)
D Tighten door glass attaching screws to specified torque.
Refer to "FRONT DOOR GLASS" in this section.
BODY SERVICE 9-5