Suzuki Wagon R Manual page 707

Hide thumbs Also See for Wagon R:
Table of Contents

Advertisement

7A-36 MANUAL TRANSMISSION
4
A: Pin slit (Face outward)
12) Drive in spring pin facing its slit A outward.
13) Install steel ball, tighten shift fork plug (3) applied with thread
lock cement.
"A": Thread lock 1322, 99000-32110
Tightening Torque
.
(c): 10 N
m (1.0 kg-m, 7.5 lb-ft)
14) Fit hub plate (1) and fix it with circlip (2).
15) Install circlip (4) to the end of 5th & reverse gear shift guide
shaft.
CAUTION:
D Coat shift fork plug with thread lock cement reason-
ably. If it is done to much, excess may interfere in ball
movement and cause hard shift to 5th speed.
D Make sure circlip is installed in shaft groove securely.
16) Clean mating surface of both left case (2) and side cover (1),
coat mating surface with sealant evenly, mate it with left case
and then tighten bolts.
"B": Sealant Bond No. 1215, 99000-31110
Tightening Torque:
.
(a): 10 N
m (1.0 kg-m, 7.5 lb-ft)
.
(b): 23 N
m (2.3 kg-m, 17.0 lb-ft)

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents