Suzuki Wagon R Manual page 870

HI
LO
PASS
INSPECTION
Check the continuity at each switch position. If any continuity is not
obtained, replace switch.
Terminal
Switch Position
Passing (PASS)
Low Beam
High Beam (HI)
INSTALLATION
1) Connect couplers to turn & dimmer switch.
2) Push turn & dimmer switch into steering column till it clicks.
3) Install steering column cover. Reverse removal procedure.
D.R.L. CONTROLLER (if equipped)
INSPECTION
1) Disconnect negative cable at battery.
2) Disconnect D.R.L. controller lead wire coupler.
3) Check the continuity between controller terminals as follow:
Position light circuit : between terminal (a) and (b)
Headlight circuit
If any continuity is not obtain, replace controller.
LIGHTING SYSTEM 8B-9
ED ED HL HL HU HU
: between terminal (c) and (d)
HF HF