6A-12 ENGINE MECHANICAL
THROTTLE BODY AND INTAKE MANIFOLD
: Tightening Torque
: Do not reuse
FWD
REMOVAL
1) Relieve fuel pressure according to procedure described in Sec-
tion 6-1.
2) Disconnect negative cable at battery.
3) Drain cooling system.
WARNING:
To help avoid danger of being burned, do not remove
drain plug and radiator cap while engine and radiator are
still hot. Scalding fluid and steam can be blown out under
pressure if plug and cap are taken off too soon.
1. Stay
2. Throttle body
3. Gasket
4. EFE heater
5. Intake manifold
6. Gasket