Suzuki Wagon R Manual page 487

6A1-32 ENGINE MECHANICAL
ROCKER ARMS, ROCKER ARM SHAFT AND CAMSHAFT
12
: Tightening Torque
REMOVAL
1) After disconnect negative and positive cables at battery, remove
battery and battery tray.
2) Drain cooling system.
3) Disconnect radiator inlet hose from thermostat case.
4) Remove timing belt as previously outlined.
5) Remove camshaft timing belt pulley (1) by using special tool.
Special Tool
(A): 09917-68220
6) Remove cylinder head cover as previously outlined.
5
1. Camshaft:
Apply engine oil to sliding surface
of camshaft.
2. Camshaft oil seal:
Apply engine oil to oil seal lip.
3. Rocker arm shaft:
Apply engine oil to sliding surface
of rocker arm shaft.
4. O-ring
5. Rocker shaft bolts
6. Rocker arm (IN):
Apply engine oil.
7. Rocker arm No.1 (EX):
Apply engine oil.
8. Rocker arm No.2 (EX):
Apply engine oil.
9. Valve adjusting screw
10. Valve adjusting screw
11. Clip
12. Lock nut
13. Rocker arm spring
14. Intake valve
15. Exhaust valve
16. Valve spring
17. Valve spring retainer
18. Valve cotter
19. Valve spring seat
20. Valve stem seal