General Information For Commissioning; Explanations Regarding The Starter User Interface - Siemens Sinamics S110 Function Manual

General information for commissioning

1.1

Explanations regarding the STARTER user interface

Use STARTER to create your sample project. The different areas of the user interface are
used for different configuration tasks (refer to diagram below):
● Project navigator (area
● Working area (area
● Detail view (area
Function Manual
Function Manual, 01/2011, 6SL3097-4AB10-0BP3
added to your project.
②
– When you are configuring the drive, this area contains the Wizards that help you
configure the drive objects.
– When you configure, for example, the parameters for the speed setpoint filter
– When you call up the expert list, the system displays a list of all the parameters that
you can view or change.
③
): This area provides detailed information on faults and warnings, for
example.
①
): this area displays the elements and objects that can be
): you create the project in this area:
1
21