Commissioning Of The Profibus Slave-To-Slave Communication - Siemens Sinamics S110 Function Manual

Hide thumbs Also See for Sinamics S110:

Table of Contents

Communication

9.3 Communication via PROFIBUS DP

Commissioning of the PROFIBUS slave-to-slave communication

The commissioning of slave-to-slave communication between two SINAMICS drive devices

using the additional Drive ES Basic package is described below in an example.

Settings in HW Config

The project below is used to describe the settings in HW Config, using the example

"Standard telegrams".

1. Select a slave (e.g. SINAMICS S) and use its properties to configure the telegram for the

Example project of a PROFIBUS network in HW Config

connected drive object.

Function Manual, 01/2011, 6SL3097-4AB10-0BP3

Function Manual

Show Quick Links

Table of Contents