Siemens Sinamics S110 Function Manual page 7

Standard scope
The scope of the functionality described in this document can differ from the scope of the
functionality of the drive system that is actually supplied.
● Other functions not described in this documentation might be able to be executed in the
● Functions can be described in the documentation that are not available in a particular
● Extensions or changes made by the machine manufacturer must be documented by the
For reasons of clarity, this documentation does not contain all of the detailed information on
all of the product types. This documentation cannot take into consideration every
conceivable type of installation, operation and service/maintenance.
Technical Support
Country-specific telephone numbers for technical support are provided in the Internet under
Contact:
http://www.siemens.com/automation/service&support
EC Declaration of Conformity
The EC Declaration of Conformity for the EMC Directive can be found on the Internet at:
http://support.automation.siemens.com
There – as a search term – enter the number 15257461 or contact your local Siemens office.
The EC Declaration of Conformity for the Low Voltage Directive can be found on the Internet
at:
http://support.automation.siemens.com
There – as a search term – enter the number 22383669 .
Note
When operated in dry areas, SINAMICS S devices conform to the Low Voltage Directive
73/23/EEC or 2006/95/EEC.
Note
SINAMICS S devices fulfill EMC Directive 89/336/EEC or 2004/108/EEC in the configuration
specified in the associated EC Declaration of Conformity for EMC and when the EMC
installation guideline is implemented, Order No. 6FC5297-0AD30-0⃞P⃞.
Function Manual
Function Manual, 01/2011, 6SL3097-4AB10-0BP3
drive system. This does not, however, represent an obligation to supply such functions
with a new control or when servicing.
product version of the drive system. The functionality of the supplied drive system should
only be taken from the ordering documentation.
machine manufacturer.
Preface
5