Description Of Safety Functions - Documentation Part 2 - Siemens Sinamics S110 Function Manual

8.9.4.2

Description of safety functions - Documentation Part 2

Introduction
Note
This description of a system is for illustration purposes only. In each case, the actual settings
for the system concerned will need to be modified as required.
Function table
Table 8- 24
Mode of operation
Production
Setup
...
Safety Integrated functions used
Table 8- 25
Drive
1
2
...
Comments:
The drive uses SI function SS1 for the EMERGENCY STOP functionality.
Function Manual
Function Manual, 01/2011, 6SL3097-4AB10-0BP3
Example table: Active monitoring functions depending on the operating mode, the
protective doors or other sensors
Protective door
closed and locked
unlocked
closed and locked
unlocked
...
Example: functional overview of the safety functions
SI function
SOS
SLS 1
SOS
SLS 1
...
8.9 Acceptance test and acceptance report
Drive
1
1
1
1
...
Limit
100 mm
200000 mm/min
100 °
50 rpm
...
Safety Integrated Functions
Status of monitoring
functions
All deselected
SOS selected
All deselected
SLS 1 deselected
...
Active if
refer to the function table
refer to the function table
refer to the function table
refer to the function table
...
469