Application Examples; Input/Output Interconnections For A Safety Switching Device With Cu305 - Siemens Sinamics S110 Function Manual

Safety Integrated Functions

8.8 Application examples

Before re-entering the danger area and before resuming operation, a (partial) acceptance
test must be carried out for all the drives affected by the component exchange (see the
"Acceptance test" chapter).
8.8 Application examples
8.8.1

Input/output interconnections for a safety switching device with CU305

Interconnecting an F-DO with a safe input of a safety device
Figure 8-36
The external pull-up resistor is only required in exceptional circumstances, see design
example at the end of this section.
454
WARNING
F-DO at equivalent/antivalent safe input on safety device XY (e.g. safety PLC)
Function Manual, 01/2011, 6SL3097-4AB10-0BP3
Function Manual