Siemens Sinamics S110 Function Manual page 96

Diagnostics
5.2 Diagnostics via STARTER
Parameterizing and operating the ramp-function generator
Use the STARTER commissioning tool to parameterize and operate the function generator.
Figure 5-1 "Ramp-function generator" initial screen
Note
Please see the online help for more information on parameterization and operation.
Properties
● Concurrent injection to several drives possible.
● The following parameterizable signal shapes can be set:
● An offset is possible for each signal. The ramp-up to the offset is parameterizable. Signal
94
– Square-wave
– Staircase
– Triangular
– PRBS (pseudo random binary signal, white noise)
– Sinusoidal
generation begins after the ramp-up to the offset.
Function Manual, 01/2011, 6SL3097-4AB10-0BP3
Function Manual