Communication
9.3 Communication via PROFIBUS DP
Note
You can operate a SIMATIC HMI together with a drive unit independently of an existing
The "variable" HMI functions can be used for drive units. Other functions cannot be used
Individual parameter values can be accessed. Entire arrays, descriptions, or texts cannot
9.3.2.5
Monitoring: telegram failure
When monitoring telegram failure, SINAMICS differentiates between two cases:
1. Telegram failure with a bus fault
596
control.
A basic "point-to-point" connection can only be established between two nodes (devices).
(e.g. "messages" or "recipes").
be accessed.
Function Manual, 01/2011, 6SL3097-4AB10-0BP3
Function Manual