Trace Function - Siemens Sinamics S110 Function Manual

5.2.2

Trace function

Description
You can use the trace function to record measured values over a defined period, depending
on trigger conditions.
Call to the trace function
The "Trace" parameter screen is selected via the following icon in the toolbar of the
STARTER commissioning tool.
Figure 5-5
Parameterizing and using the trace function
Use the STARTER commissioning tool to parameterize and operate the trace function.
Figure 5-6 Trace function
Function Manual
Function Manual, 01/2011, 6SL3097-4AB10-0BP3
STARTER icon for "trace/function generator"
Diagnostics
5.2 Diagnostics via STARTER
97