Siemens Sinamics S110 Function Manual page 30

General information for commissioning
1.2 BICO interconnection procedure in STARTER
Graphical screen interface
When carrying out BICO interconnection via the graphical screen interface, proceed as
follows:
If for the setpoint speed, for example, you want to interconnect p parameter p1155[0] for
"speed setpoint 1" with r parameter r2060[1], proceed as follows:
Figure 1-6 Interconnection via graphical screen interface 1
1. In the project navigator under Drive_1 → Open loop/closed loop control, double-click the
28
selection Setpoint addition.
Function Manual, 01/2011, 6SL3097-4AB10-0BP3
Function Manual