Bico Interconnection Procedure In Starter - Siemens Sinamics S110 Function Manual

1.2

BICO interconnection procedure in STARTER

Introduction
Parameterization can be carried out via the following means:
● Expert list
● Graphical screen interface
The steps described below explain the general BICO interconnection procedure in
STARTER.
Expert list
When carrying out BICO interconnection via the expert list, proceed as follows:
If you want, for example, to interconnect parameter p0840 of the control word with r
parameter r2090[0], proceed as follows:
1. In the project navigator, call up the expert list by selecting, for example, Drive_1 → right-
Function Manual
Function Manual, 01/2011, 6SL3097-4AB10-0BP3
click → Expert → Expert list.
General information for commissioning
1.2 BICO interconnection procedure in STARTER
23