Diagnostics
5.2 Diagnostics via STARTER
In the STARTER commissioning tool, select the parameter screen "Measuring sockets" in
the project tree under the CU in the entry inputs/outputs in the tab Measuring sockets.
Note
Please see the online help for more information about parameterizing and operation.
Properties
Resolution
Voltage range
Measuring cycle
Short-circuit-proof
Parameterizable scaling
Adjustable offset
Adjustable limitation
Signal chart for measuring sockets
Figure 5-11
102
8-bit
0 V to +4.98 V
Depends on the measuring signal
(e.g. actual speed value in speed controller cycle 250 μs)
Signal chart for measuring sockets
Function Manual, 01/2011, 6SL3097-4AB10-0BP3
Function Manual