Internal Encoding Of The Binector/Connector Output Parameters; Sample Interconnections - Siemens Sinamics S110 Function Manual

10.4.4

Internal encoding of the binector/connector output parameters

The internal codes are required for writing BICO input parameters via PROFIBUS, for
example.
Figure 10-9
10.4.5

Sample interconnections

Example: Interconnection of digital signals
Suppose you want to operate a drive via terminals DI 0 and DI 1 on the Control Unit using
jog 1 and jog 2.
Figure 10-10 Interconnection of digital signals (example)
Function Manual
Function Manual, 01/2011, 6SL3097-4AB10-0BP3
Internal encoding of the binector/connector output parameters
Basic information about the drive system
10.4 BICO technology: Interconnecting signals
677